HOWARDS RACING COMPONENTS CL253385-10 Howards Racing Components CL253385-10 BBF FE Hydraulic Roller Cam and Lifter Kit

The Howards Racing Components CL253385-10 BBF FE Hydraulic Roller Cam and Lifter Kit is designed for Ford FE-Series engines requiring a performance-oriented hydraulic roller valvetrain. This complete kit pairs a hydraulic roller camshaft with matching lifters to provide a coordinated upgrade for street, strip, and high-performance applications. With an aggressive yet usable operating range, the camshaft is engineered to support strong midrange response and power through the upper portion of the recommended RPM band.
The camshaft features 0.560-inch lift at both the intake and exhaust valves, with advertised duration ratings of 288 degrees intake and 294 degrees exhaust. A 110-degree lobe separation angle helps define the camshaft’s power characteristics, throttle response, and idle profile. The recommended operating range of 2,400 to 5,800 RPM makes this kit suitable for performance-focused engine combinations that are built to operate above typical stock engine speeds. Proper selection of complementary cylinder heads, intake, exhaust, compression ratio, and valve springs is important for achieving the intended results.
As part of the Howards Racing Components line, the CL253385-10 kit is intended to deliver dependable valvetrain performance when installed and set up according to the engine builder’s specifications. The hydraulic roller design eliminates the need for routine lash adjustment associated with many mechanical roller systems while supporting high-performance camshaft profiles. Verify engine compatibility, required clearances, rocker arm geometry, pushrod length, and valve spring specifications before installation. This kit is specifically identified for Ford FE-Series applications and is supplied as a camshaft and lifter combination for a matched valvetrain upgrade.

Features:

• Brand: Howards Racing Components

• Part Number: CL253385-10

• Application: Ford FE-Series engines

• Product Type: Hydraulic roller camshaft and lifter kit

• Valve Lift: 0.560 inch intake and 0.560 inch exhaust

• Duration: 288 degrees intake and 294 degrees exhaust

• Lobe Separation Angle: 110 degrees

• Operating Range: 2,400 to 5,800 RPM

• Kit Contents: Camshaft and matching hydraulic roller lifters